-40%
1 hp 110 120 V 750W AC industrial servo motor + Driver internal speed control
$ 92.4
- Description
- Size Guide
Description
1 HP 750 Watt Computer Controlled Servo Motor.New in box with internal
rotary speed control.
Sold with a custom built matching control unit
.
Speed is
programmable
for any range between 300 to 4,500 RPM
Note: Settings are limited to 100 RPM intervals.
See images for
measurements
.
Note: the maximum distance between control unit and motor is 22 inches.
Runs on typical 110 to 120 volt AC
household
power
supply's
Includes:
A complete servo motor as seen in images.
A programmable custom built stand alone servo motor driver with internal speed control and overload protection.
Whats in the box:
One 750 watt (1 HP) servo motor
One customized servo motor
controller (driver) with internal speed control and
thermal overload protection.
Motor
programming
+ spindle speeds and Reverse:
The motor speed can be programmed to operate in any range chosen by the user.
Between 300 and 4,500 RPM's.
Note: Settings are limited to 100 RPM intervals.That means it can be set to 500 RPM but it cannot be set to 550 RPM as the next step is 600 RPM
The full range of speed (RPM's) can also be controlled with just the speed control knob.
Speed control
programming
only requires a few easy steps.
Reverse is simple, just hold the yellow button for a few seconds.
Programming
includes the ability to set bottom and top RPM range separately. In other words you can program the system to run the spindle at any speed or range of speeds you choose (see below).
Slowest speed achievable: Motor 100 RPM.
(Below 300 is not
recommended)
.
Highest speed: 4,500 RPM
.
Soft start is programmable and will be set as soft as possible when you receive this motor. This program is very effective in reducing drive belt wear etc.
Braking strength is also programmable and will be set as low as possible. Personally I wish I could set it lower.
Self
diagnostics
with fault code chart and
programming
instructions.
Safe turn on system where the speed control knob must be in the full counter clockwise (stop) position when turned on. When turned on the self
diagnostic
system checks for faults and will not allow the motor to run until the speed control knob is turned all the way to stop first.
Use at your own risk.
Our liability is limited to the purchase price of this item.
Motor Specifications:
Watt: 750 (
1.0057665666 HP)
Voltage: 110V
HZ: 60
Torque: 10 N.M.
RPM:
100 to 4,500 RPM
in 100 RPM increments.
Note: Manufacturer recommended 500 to 4,000 RPMs
My personal testing results: This motor runs best between 300 and 4,500 RPMs.
This listing is for what is seen in the primary image.
It will include printed programming instructions.
Sh
ipping:
Due to weight it is best to ship USPS
priority
large flat rate box and to USA only.
.00
will
be added to the
order to
cover insurance
Returns:
This item will be in strict
compliance
with the eBay returns
policy's
applied to this item when it was listed.
Buyer has 14 days to file an eBay return request.
Buyer pays return shipping.
All items shipped must be returned in new unused and undamaged condition or no refund will be issued.
Limited 30 to 60 day parts warranty. Labor is buyers responsibility:
See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the
identity
mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead
refurbished
or demos that I have from previous builds.
Warranty
starts on the day eBay records the system as paid and not the date the item is actually
received
.
Servo Motor (in stock): I will exchange a defective servo motor for up to 60 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. (contact me, some times parts returned can be limited to one item)
Computer control unit (in stock): I will exchange a defective control unit for up to 30 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. (contact me, some times parts returned can be limited to one item)
Claims about a fully operational system making minor noises are not warranty, they are normal. Especially when running at speeds over 2,000 RPM
After warranty support:
There is nothing worse then having an expensive item break 2 days after the warranty expires. Please contact me because as long as there is no abuse, I will offer a solution. This often includes free parts + installation. That is as long as you communicate and pay shipping both ways. I will also provide the same service to repair your system for up to a year. Just return it with an honest answer as to why it failed, to include things like I jammed it and smoked it. I will fix it for you at my cost for parts. Yes, I keep control boards in stock for this reason. I also keep motors, belts and every part used to build these in stock. Just contact me and we will have you up and running within days, not 6 months waiting for parts from China.
Ask lots of questions before ordering:
Do not worry about missing this item
and thus buying it and than changing your mind after the fact.
If you miss it, I will build more soon.
These items are custom builds and
communication
may be required:
If you do not ask questions or if your feedback score is poor, I will likely try to establish contact with you through eBay before I ship.
than
if you do not reply, I will cancel the sale and refund your purchase.
Recent feedback on this item:
"Motor and controller arrived quickly with excellent instructions. Worked great! When I had issues with my own breaker box Dan walked me through it to make sure it wasn’t anything related to the product!"