Align 150GRS Flybarless System Set [AGNHEG15004]

Description

The Align 150GRS Flybarless System Set, intended for use with the T-REX 150/150X, integrates a 6-axis gyro, ARM Cortex M4 32 bits processor, ALIGN A.BUS receiver, Bluetooth, and dual ESC. Although it's small, the redesigned system is powerful allowing the T-REX 150X to perform maneuvers just like a big scale helicopter. Moreover, Attitude Auto-level Mode is specially designed for beginners providing an easy and fun flying experience. With the built-in Bluetooth module setup or adjusts of the flight parameters and system upgrades can be done at anytime using the FREE APP.
Features:
6-axis Gyro： 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
Attitude Auto-level Mode： While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
Rescue Mode： While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
3D Flying： Brand new DFCS(Direct Flight Control System)Controller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
Built-in Receiver： ALIGN A.BUS Receiver
Plug-in Receiver(Required)： Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
Specifications:
Operating voltage range：
2S Li-Po
Operating current consumption：
<100mA @ 5V
Rotational detection rate：
2000°/sec
Rudder yaw detection rate：
2000°/sec
Sensor resolution：
16BIT
Operating temperature：
-20℃ ~ 65℃
Operating humidity：
0% ~ 95%
Swashplate Support:
MODE H-1
Receiver Support:
ALIGN / Futaba S-FHSS、DSM2 / DSMX / DMSS
About Us
|
View Store