Industrial sewing Machine Mini Lathe Servo Motor Rotary Speed Control Switch

Description

This Custom built rotary speed control switch replaces the pedal switch found on most industrial sewing servo motor controllers.
See pictures.
This is not intended for use on industrial sewing machines. This is designed for those of us using these servo motors to modify our old or inferior machines with a Vevor or Mophorn industrial servo motor and who want a better looking speed control system.
Tested and proven on both above brands and may work on other brands that have the lever style switch.
Plug and play, just turn off the system, unplug the lever switch and plug this one in it's place.
Does not fit or work with
Sewtco Industrial Sewing Machine Servo Motors.
Will not cause fault codes.
When you turn on the
controller
it will go through self
prognostics
and set at zero ready to go.
Safety feature:
If you inadvertently turn on the power with the speed control set to any speed besides stop; The motor will not run until your turn the rotary to full stop. Than self diagnostics will complete and you are ready to go.
Switch active function:
The current switch allows speed control in the top 5/8 of the rotation or position 11 AM to 5:30PM
Therefore the first 40% of rotation 5:30AM to 11:AM is motor stopped but ready.
Only the first 1/8 of rotation 5:30 to 6:00 is self
diagnostic
and prepare to run.
90 day limited warranty
:
If this switch fails, return it and I will replace it or refund your purchase as follows:
Buyer pays return shipping.
I will inspect and test it and if there is no obvious
physical/electrical
damage, I will ship you a
replacement
.
Physical damage is cut wires,
pried
or attempted to open housing.
Electrical damage is, buyer let the smoke out do to improper use such as,
attempting to install it on something besides the control unit in the images or incorrect voltage was applied by outside influences such as voltage spikes caused by lightening or some how plugging it directly into a 110 volt outlet instead of the control unit.
Solid state:
No user serviceable parts inside.
Glued assembly is impossible to open without major damage.
For that reason, if it fails (see warranty), return it. I will send a replacement or refund your purchase.
Reverse engineering:
Do not waste your time and money.
Instead by the parts kit. see my other listings, eBay listing #
184629614692
Shipping:
Ships USPS ground.
Returns:
Buyer pays return shipping.
Ask lots of questions:
Do not purchase under pressure. There is only one in stock right now but many more will be available in a couple days.
Thank you for looking.