SAB Goblin RAW 420 DD rc heli, assembled AIRFRAME & MOTOR ONLY, w/ manual+spares

Description

This unique 420 size heli has been well taken care of and maintained, but has now been disassembled for sale. You will be receiving the complete airframe with the motor, but no other electronics. You will need to supply cyclic and rudder servos, servo horns, esc, receiver, battery, and flybarless gyro system.
You will receive the following additional items that came with the kit originally...
- Printed materials
- Upgrade/Accessory sheet
- Disclaimer (RC helis are dangerous!)
- Registration card*
- Goblin Group invite card
- Assembly manual
- Spare strip of double sided adhesive foam
- Bag 9-1 spare screws
- Tail belt tensioner tool
- Bag 7-4 spare main shaft shims
- Bag pg. 18 spare screw
- Bag 9-4 servo aligning tool
- Bag 13-4 spare main spindle shims
- De-soldered male connectors (H0550) ready for you to place on your own ESC - see manual page 22
- "Back Up" bag with spare o-rings, shims, ball ends, ball links, screws, and finishing washers
... and some extra items included that I purchased separately during the build...
- Swashplate leveller tool H1686-S with instruction sheet
- x1 spare ProTek RC 3.5mm "Super Bullet" Gold Connector (x3 already soldered on the motor leads)
- Intermediate XT60 male connector soldered onto quick-change battery system. A bit unusual, but worked well!
* - I registered the kit on goblin-helicopters.com, and it doesn't seem like a straightforward process to un-register it. Should you be interested in re-registering it under your own name, then please contact me with any information you get from SAB about what I need to do to help.
Here's a retail description of this model...
Features:
Direct drive motor (Competition series)
S Line carbon fiber main
Quick release battery with built in connectors
Large 10mm one way bearing system
Sacrificial Zytel HTN resin blade grip arms
Battery can be swapped without canopy removal
Specifications:
Main Rotor Diameter: 935mm
Main Blade Length: 420mm
Tail Rotor Diameter: 190mm
Tail Blade Length: 70mm
Main Shaft Diameter: 8mm
Tail Shaft Diameter: 5mm
Weight: 1000g (with motor and blades)
Needed to Complete:
(3) Micro Cyclic Servos
(1) Mini Tail Servo
(1) 60-80A Electronic Speed Control
(1) Flybarless Gyro System
(1) 6+ 2.4GHz Transmitter System
(1) 6+ 2.4GHz Matching Receiver System
(1+) 6s 22.2V LiPo Battery 2200-2600mAh
Misc. Building Tools (Outlined in the manual)
Shipping will be by USPS Ground Advantage, or UPS Ground (via P!rateSh!p) - your choice.
Thanks for looking :)