SHERLINE 4530 3.5" X 8" LATHE (METRIC) + Adjustable Handwheels

Description

Product Description
Model 4530 3.5″ x 8″ lathe and standard accessories (METRIC VERSION)
For INCH search on eBay for PN 4500
Standard equipment for the model 4500 (4530 metric) lathe includes:
A powerful 90V DC motor with electronic speed controller.
2.75″ (70mm) x 6.0″ (152mm) crosslide.
15″ (381mm) steel bed to allow 8″ (203mm) between centers.
2.5″ (63mm) resettable “zero” handwheel on the leadscrew, a 2″ (51mm) resettable “zero” handwheel on the crosslide feed screw, and a standard 1-5/8″ (41mm) handwheel on the tailstock. Each handwheel has laser engraved aluminum handwheel collars
Pulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual.
SPECIFICATIONS:
Swing Over Bed
3.50″ (90 mm)
Swing Over Carriage
1.75″ (45 mm)
Distance Between Centers
8.00″ (200 mm)
Hole Through Spindle
.405″ (10 mm)
Spindle Nose Thread
3/4″-16 T.P.I.
Spindle Nose Taper
#1 Morse
Spindle runout of Morse taper
.0005″ or less
Travel of Crosslide
4.25″ (110 mm)
Tailstock Spindle Taper
#0 Morse
Protractor Graduations
0° to 45° by 5°
Handwheel Graduations
.001″ (.01 mm)
Length Overall
23.5″ (597 mm)
Width Overall
10.5″ (267 mm)
Height Overall
8.5″ (216 mm)
Shipping Weight
25 lb. (11.4 kg)
Motor
90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.
Spindle Speed Range
70-2800 RPM continuously variable by electronic speed control