-40%
Sherline Cutoff Tool and Holder 3002
Sherline Cutoff Tool and Holder 3002

Sherline Cutoff Tool and Holder 3002

$ 31.65

Availability: 100 in stock
  • Condition: New
  • Country/Region of Manufacture: United States
  • Modified Item: No
  • California Prop 65 Warning: CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection. I can do all this through him who gives me strength. Philippians 4:13
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Suitable For: Metal
  • Model: 3002
  • Return shipping will be paid by: Buyer
  • Brand: Sherline
  • MPN: Does Not Apply
  • Custom Bundle: No
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Non-Domestic Product: No

    Description

    Sherline Cutoff Tool and Holder 3002
    Sherline's Cuttoff Tool and holder is used after completing a part in the lathe. IT is frequently necessary to separate the part from the excess material used for chucking. This operation is best accomplished with the use of a cutoff tool or "parting tool" as it is sometimes called.
    The Sherline cutoff tool and holder consists of a very slender high-speed tool steel cutting blade mounted in a special holder.
    The thinness of the blade. (.040"or 1mm) enables it to feed into the part quite easily, and , at the same time, minimizes the amount of waste material.
    The turning speed for parting should be approximately one-half the normal turning speed for any given material. One word of caution; never use a parting tool on a part mounted between centers. The part can bind on the cutter and result in a scrapped part or a broken tool.
    A small amount of cutting oil is a must. Parting off free maching material over a 1.00" (25mm) diameter will always be a problem on a machine of this size.